Search Results

SINGLE, LOW LEAKAGE PICO-AMP DIODES < Back J/SST/PAD Series SINGLE, LOW LEAKAGE PICO-AMP DIODES The PAD Series Ultra-Low Leakage, Protection Diode is a direct replacement for the Siliconix-Vishay part series. It is ideal for Pico Amp, Ultra-Low Leakage, Protection Diode Applications. This part series is available in the TO-72 3L RoHS, TO-92 2L RoHS and SOT-23 3L RoHS package, as well as die form. Advanced screening options are available for our diverse product lineup, featuring JFETS, Bipolar transistors, MOSFETs, current regulators, and Diodes. Our special screening covers all the parameters listed in the standard datasheet, including comprehensive package pin-out. Connect with our experienced technical team to discuss your specific needs and tailor your requirements—email us at support@linearsystems.com or call (510) 490-9160. MOQ applies to these specialized services. Ordering Information Below are the options you have when ordering this part series: PAD1 TO-72 3L RoHS PAD2 TO-72 3L RoHS PAD5 TO-72 3L RoHS PAD10 TO-72 3L RoHS PAD20 TO-72 3L RoHS PAD50 TO-72 3L RoHS PAD100 TO-72 3L RoHS JPAD1 TO-92 2L RoHS JPAD2 TO-92 2L RoHS JPAD5 TO-92 2L RoHS JPAD10 TO-92 2L RoHS JPAD20 TO-92 2L RoHS JPAD50 TO-92 2L RoHS JPAD100 TO-92 2L RoHS PAD1 SOT-23 3L RoHS PAD2 SOT-23 3L RoHS PAD5 SOT-23 3L RoHS PAD10 SOT-23 3L RoHS PAD20 SOT-23 3L RoHS PAD50 SOT-23 3L RoHS PAD100 SOT-23 3L RoHS PAD1 Die PAD2 Die PAD5 Die PAD10 Die PAD20 Die PAD50 Die PAD100 Die Datasheet Spice Model Application Notes

< Back FAST SAMPLE AND HOLD Linear Systems Jun 10, 2024 In this interesting design, a strobe pulse sets the sample mode. Here's how it works: When the strobe pulse s —Strobe pulse will turn on JFET Q1 which allows the signal to be sampled to charge capacitor C1. When the strobe pulse returns to 0 V, JFET Q1 is turned off and capacitor C1 holds the voltage value of the sampled signal plus the offset voltage of MOSFET Q 2. The JFET used could be anyone of Linear Integrated Systems switch JFETs. Ideally the lower the drain -to-source voltage the better to reduce the offset voltage of the JFET. The output signal decays at a rate of 1 mV/s. From logic input of 531 op-amp IC2 turns on JFET Q1 to complete feedback loop to IC1, Q1, and Q2. Capacitor C1 charges to voltage equal to that of input signal plus gate-to-source offset voltage of Q2. At end of strobe time, feedback loop is broken and C1 holds voltage until time of next strobe pulse. Decay in output voltage between samplings is 1 mV/s.—"Signetics Analog Data Manual," Signetics, Sunnyvale, CA, 1977, p 643-644.

2N5114 SERIES LOW ON-RESISTANCE, P-CHANNEL JFET SWITCH < Back 2N5114 Series 2N5114 SERIES LOW ON-RESISTANCE, P-CHANNEL JFET SWITCH The 2N5114 Series Low On-Resistance, P-Channel JFET Switch is a direct replacement for Siliconix-Vishay equivalent part. It is ideal for low resistance, low capacitance switching applications. Available in TO-18 3L RoHS package, as well as in die form. Advanced screening options are available for our diverse product lineup, featuring JFETS, Bipolar transistors, MOSFETs, current regulators, and Diodes. Our special screening covers all the parameters listed in the standard datasheet, including comprehensive package pin-out. Connect with our experienced technical team to discuss your specific needs and tailor your requirements—email us at support@linearsystems.com or call (510) 490-9160. MOQ applies to these specialized services. Ordering Information: Below are the options you have when ordering this part series: 2N5114 TO-18 3L RoHS 2N5115 TO-18 3L RoHS 2N5116 TO-18 3L RoHS 2N5114 Die 2N5115 Die 2N5116 Die Datasheet Spice Model Application Notes

< Back Millions of Devices in Stock! Linear Systems Mar 17, 2023 LS844 Monolithic Dual Small-Signal JFET, 3N163 Small-Signal MOSFET, LS320 BiFET and Many More! NEWS RELEASE FOR INFORMATION CONTACT: Linear Systems, Inc. Sales Department Phone: (510) 490-9160 Email: sales@linearsystems.com Linear Systems Announces Large-Scale Availability of Ultra Low Noise JFETs and Small-Signal Semiconductors FREMONT, Calif. – August 26, 2021 – Linear Systems, a world-class producer of ultra-low-noise JFETs and other small-signal discrete semiconductors, announces the large-scale availability of five of its top-performing components. These components, ranging from low-noise monolithic dual JFETs to small-signal MOSFETs, are available in wafer form in quantities ranging from one million to ten million for immediate packaging and shipment. All parts meet Linear Systems' industry-leading datasheet specifications and are available for fast delivery due to substantial buffer stock of wafers. Parts available for shipment include : 1. LS844 Monolithic Dual Small-Signal JFET: One million dice in wafer form in stock. This low-noise front-end amplifier features high Common Mode Rejection Ratio and excellent matching over a wide range of temperatures. [Download Data Sheet] 2. 3N163 Small-Signal MOSFET : Three million dice in wafer form in stock. Ideal for sensor applications such as gas detection and piezo devices, with half the noise of competitors' parts. [Download Data Sheet] 3. LS320 BiFET Amplifier: 1.3 million dice in wafer form in stock. A high-input impedance, single monolithic amplifier, designed as a direct replacement for Amperex equivalent parts. Perfect for high impedance sense amplifier applications. [Download Data Sheet] 4. 2N/PN/SST4391 N-Channel JFET Series: 2.5 million dice in wafer form in stock. This single, low-noise N-channel JFET switch is ideal for low-noise, high-gain, low-resistance switching and amplifier applications. [Download Data Sheet] 5. 2N/PN/SST4117A N-Channel JFET Series: 14.3 million dice in wafer form in stock. This single, low-capacitance, ultra-high-input-impedance N-channel JFET amplifier is a direct replacement for Fairchild, NXP, and Siliconix-Vishay parts. [Download Data Sheet] These parts are also available in bare die and sorted wafer form. In addition to these million-plus parts inventories, Linear Systems keeps substantial quantities of all its parts on hand, including the industry-leading LSK389 monolithic dual N-channel ultra-low-noise JFET. About Linear Systems Founded in 1987, Linear Systems is a Silicon Valley-based designer, manufacturer, and seller of precision, high-performance, small-signal discrete semiconductors. Linear Systems produces ultra-low-noise monolithic dual and single JFETs, bipolar transistors, high-speed DMOS switches, small-signal MOSFETs, ultra-low-leakage diodes, and BiFET amplifiers. These parts are designed into world-class products in fields such as Test & Measurement, Audio, Scientific Optical, Military Sensor, Hydrophone/Sonobuoys, Industrial Controls, and Hybrids. For these and other parts, download Linear Systems' [Product Selection Guide] and [Databook]. For more information, visit www.linearsystems.com .

< Back 3N163 App Note Introduction Wireless real-time radiation sensors networks offer the general public and those that work in high radiation areas greater protection against radiation hazards. Combined with real-time localized and global heat mapping of radiation levels, these radiation networks will help give government and environmental agencies the ability to understand the radiation landscape and respond quickly to radiation changes before they become life-threatening. Low-cost, low-power and no-power radiation sensors, also known as RADFETs (radiation field effect transistors) or dosimeters, are necessary for the implementation of these networks. The RADFET is unique because it does not need a power source to detect radiation. It is also unique in that it records the amount of actual radiation exposure and, as a non-volatile analog memory device, stores the level of radiation exposure as a change in threshold voltage. RADFETs are relatively simple circuits, consisting of only a PMOS transistor. The LS 3N163 PMOS (P-Channel) MOSFET transistor can be used to design RADFETs to meet different design requirements like cost, sensitivity, linearity, and power. The ability to optimize a RADFET for these different design requirements give network designers the ability to construct wireless radiation sensor networks that can also be optimized for cost and performance on a wide scale. Radiation detector principles PMOS MOSFET radiation detectors work on the principle that electron-hole pairs form when radiation or an ionizing particle strikes the MOSFET. This in turn results in shifts to the threshold voltage and drain current parameters of the MOSFET device. Because the change in threshold voltage with radiation exposure is highly linear in a PMOS device, PMOS devices such as the LS 3N163 are commonly used as a radiation detector. In a typical application, the LS 3N163 is operated in unbiased mode (no-power mode) and exposed to radiation. The change in threshold voltage is then measured and the corresponding radiation exposure level determined. In another application, where higher levels of sensitivity are needed, the LS 3N163 is operated in biased mode (power mode). Read More

Linear Systems designs and manufactures the highest-performance line of monolithic dual JFETs in the industry. Contact us for a quote! Back SST/U440 Series WIDEBAND HIGH GAIN MONOLITHIC DUAL N-CHANNEL JFET AMPLIFIER The SST/U440 Series Wideband, High-Gain, Monolithic Dual N-Channel JFET Amplifier is targeted for use in a wide range of precision instrumentation and sensor applications. The series is available inThe SST/U440 Series Wideband, High-Gain, Monolithic Dual N-Channel JFET Amplifier is targeted for use in a wide range of precision instrumentation and sensor applications. The series is available in the TO-71 6L and SOIC 8L RoHS package, as well as in die form. Advance d screening options are available for our diverse product lineup, featuring JFETS, Bipolar transistors, MOSFETs, current regulators, and Diodes. Our special screening covers all the parameters listed in the standard datasheet, including comprehensive package pin-out. Connect with our experienced technical team to discuss your specific needs and tailor your requirements—email us at support@linearsystems.com or call (510) 490-9160. MOQ applies to these specialized services. Ordering Information Below are the options you have when ordering this part series: U440 TO-71 6L RoHS U441 TO-71 6L RoHS SST440 SOIC 8L RoHS SST441 SOIC 8L RoHS Datasheet Spice Model Application Notes

< Back App Note by Dimitri Danyuk Linear Systems Mar 17, 2023 Headphone Amplifier Evaluation Board Linear Integrated Systems headphone amplifier evaluation board is a complete, low-power stereo audio amplifier for high-fidelity line-level output and headphone applications. It consists of Linear Integrated Systems JFETs along with a number of other parts mounted on a circuit board. Linear Integrated Systems headphone amplifier evaluation board includes the following features: Stereo, single ended input and single ended output 400 mW output power into 100Ω Wide frequency response (10Hz?200kHz; ?1dB) Voltage gain 5 (14dB) Low distortion (THD+N is less than 1% at 10Hz?20kHz at 5Vrms into 100Ω and less than 0.1% from 10 Hz to 20 kHz at 1Vrms into 100Ω load) Short circuit protection Pop reduction (slow start) circuit Defeatable cross feed circuit Volume control Overvoltage and reverse polarity power protection Audio input and output connections: left and right RCA phono jack inputs, ¼” stereo phone jack output External 9V–16V supply input External power supply connector: power jack, inside diameter 2.1mm, outside diameter 5.5mm

MONOLITHIC DUAL, N-CHANNEL, JFET VOLTAGE CONTROLLED RESISTOR < Back VCR11N MONOLITHIC DUAL, N-CHANNEL, JFET VOLTAGE CONTROLLED RESISTOR The VCR11N Monolithic Dual, N-Channel, JFET Voltage Controlled Resistor is a direct Siliconix VCR11 Series. It is Ideal for Variable Resistor and Grain Control Applications. This part is available in the TO-71 4L RoHS package, as well as in die form. Advanced screening options are available for our diverse product lineup, featuring JFETS, Bipolar transistors, MOSFETs, current regulators, and Diodes. Our special screening covers all the parameters listed in the standard datasheet, including comprehensive package pin-out. Connect with our experienced technical team to discuss your specific needs and tailor your requirements—email us at support@linearsystems.com or call (510) 490-9160. MOQ applies to these specialized services. Ordering Information Below are the options you have when ordering this part: VCR11N TO-71 6L VCR11N SOT-23 6L VCR11N DFN 8L VCR11N Die Datasheet Spice Model Application Notes

< Back LSJ689 Press Release Linear Systems Mar 17, 2023 Ultra Low Noise P-Channel Dual JFET NEWS RELEASE CONTACT: Linear Integrated Systems, Inc. 510-490-9160 sales@linearsystems.com LINEAR INTEGRATED SYSTEMS ANNOUNCES ULTRA LOW NOISE P-CHANNEL DUAL JFET Fremont, California – June 1, 2016 – Linear Integrated Systems, a leading full-service manufacturer of specialty linear semiconductors, announces the immediate availability of its LSJ689, a 1.8 nV/Hz @ 1kHz, low-capacitance, monolithic dual P-Channel JFET. The LSJ689 serves as the P-Channel complement to the popular monolithic dual N-Channel JFET, the LSK489. This addition to Linear Systems' family of Ultra-Low-Noise JFETs provides designers with expanded options beyond traditional N-Channel JFETs. The monolithic dual construction of the LSJ689 and LSK489 offers superior solutions for tighter Idss (drain-source saturation current) matching and improved thermal tracking compared to using individually matched JFETs. As the availability of P-Channel JFETs has declined, complementary single N-Channel and P-Channel JFETs have become increasingly limited to a few industry standards. In response, Linear Systems developed the LSK170 and LSJ74 families, providing complementary N & P-Channel single JFETs. Now, the LSJ689 and LSK489 monolithic dual JFETs provide further design flexibility, with significantly lower capacitance—4 pF versus the 25 pF of LSK170 and LSJ74. The LSJ689 and LSK489 are well-suited for differential input stages in amplifier, phono, and preamplifier designs. Additional applications include voltage-controlled resistors, thermal stable source followers, sample and hold circuits, and current matched sources. The LSJ689 is available in RoHS-compliant SOT-23 6L, SOIC-A 8L, and TO-71 6L package options. The SOT-23 6L and SOIC-A 8L packages are ideal for space-constrained circuits in audio and instrumentation applications. Key Features: - Complement to the Ultra Low Noise Monolithic Dual N-Channel JFET LSK489 - Ultra Low Noise (typically 1.8 nV/Hz @ 1kHz) - Nearly Zero Popcorn Noise - Idss (drain-source saturation current) matching to 10% max - Low Offset/Tight Matching (|Vgs1 - Vgs2| = 20mV max) - Low Capacitance (Ciss = 4 pF) - High Input Impedance - High Breakdown Voltage (BVGSS = 40V Min) - Monolithic Dual (2 JFETs on one piece of silicon, offering better matching and thermal tracking) - Available in Surface Mount SOIC-A 8L and compact SOT-23 6L packages - Lead-free/RoHS Compliant Applications: - Microphone Amplifiers, Phono Preamplifiers, Audio Amplifiers, and Preamps - Discrete Low-Noise Operational Amplifiers - Battery-Operated Audio Preamps - Audio Mixer Consoles, Acoustic Sensors, Sonic Imaging - Instrumentation Amplifiers - Wideband Differential Amplifiers - High-Speed Comparators - Impedance Converters - Voltage-Controlled Resistors, Sample and Hold, Source Followers Availability: Sampling now in SOIC-A 8L, TO-71 6L, and SOT-23 6L package options. Delivery: Factory Stock About Linear Integrated Systems Founded in 1987, Linear Integrated Systems is a precision semiconductor company providing high-quality discrete components. The company’s expertise is built upon processes and products developed at Amelco, Union Carbide, Intersil, and Micro Power Systems by founder John H. Hall. Hall, a protégé of Silicon Valley legend Dr. Jean Hoerni, previously served as Director of IC Development at Union Carbide, co-founder and Vice President of R&D at Intersil, and founder/president of Micro Power Systems. Linear Systems is a U.S.-based, full-service manufacturer of specialty linear products headquartered in Fremont, California. The company’s small-signal discrete product lines are specifically designed to meet new design and second-source requirements in the audio, hybrid, medical, space, and test and measurement markets. Our product lines include BIFET Amplifiers, Bipolar Transistors, Current Regulating Diodes, JFETs, High-Speed Lateral DMOS Switches, Low Leakage Diodes, and MOSFETs. Linear Integrated Systems provides pin-for-pin replacements for more than 2,000 discrete devices, including those currently offered or previously discontinued by Interfet, Intersil, Micro Power Systems, Motorola, National, Fairchild, Toshiba, and Siliconix-Vishay. Engineers are encouraged to contact Linear Systems for assistance with applications or special testing needs.

CURRENT REGULATING DIODE < Back J500 Series CURRENT REGULATING DIODE The J500 Series Current Regulating Diode is a direct replacement for the Siliconix-Vishay J500 Series. It is ideal for current-limiting and constant-current applications. It is available in the TO-92 2L RoHS package, as well as bare die. Advanced screening options are available for our diverse product lineup, featuring JFETS, Bipolar transistors, MOSFETs, current regulators, and Diodes. Our special screening covers all the parameters listed in the standard datasheet, including comprehensive package pin-out. Connect with our experienced technical team to discuss your specific needs and tailor your requirements—email us at support@linearsystems.com or call (510) 490-9160. MOQ applies to these specialized services. Ordering Information Below are the options you have when ordering this part series: J500 SOT23 3L RoHS J501 SOT23 3L RoHS J502 SOT23 3L RoHS J503 SOT23 3L RoHS J504 SOT23 3L RoHS J505 SOT23 3L RoHS J506 SOT23 3L RoHS J507 SOT23 3L RoHS J508 SOT23 3L RoHS J509 SOT23 3L RoHS J510 SOT23 3L RoHS J511 SOT23 3L RoHS J500 Die J501 Die J502 Die J503 Die J504 Die J505 Die J506 Die J507 Die J508 Die J509 Die J510 Die J511 Die Datasheet Spice Model Application Notes

< Back CMR Ratio in Dual JFETs Introduction When choosing the optimal JFET for a new circuit, a characteristic often overlooked is how the part’s design affects the rejection of unwanted inputs while amplifying the signal as accurately as possible. Single JFETs provide excellent impedance matching and low-noise amplification, but lack one important quality of their dual counterparts – dual discrete devices largely reject common signals. This important characteristic – Common Mode Rejection – means that selecting the right dual JFET can be the most cost-effective way of improving signal-to-noise ratio in a design. Read More

LOG CONFORMANCE, MONOLITHIC DUAL, NPN TRANSISTOR < Back LS318 LOG CONFORMANCE, MONOLITHIC DUAL, NPN TRANSISTOR Previous Next